Thursday, August 7, 2008

[MW:998] Re: Equivalent Material

Thanks Sanjeevan,
Welder qualification as per ASME IX.
API 5L X56 is equal to All combination of P1 - P11, P34, P4X and unassigned metal of similar chemical composition to these metals. Please clarify.
 
Regrads,
S.Senthilkumar

--- On Thu, 7/8/08, Quality <quality@gpsoman.com> wrote:
From: Quality <quality@gpsoman.com>
Subject: [MW:997] Re: Equivalent Material
To: materials-welding@googlegroups.com
Date: Thursday, 7 August, 2008, 11:18 AM

Senthil,
Welder qualification as per which code ASME sec IX or API 1104 or any other standard/specification?
Normally Grade/ strength of material is not an essential variable for welder performance qualification.
Nearly equivalent material is A 381 Grade Y56 (S1 Group) & A 671 grade CK75 (p1 group).
 
best regards,
Sanjeevan
----- Original Message -----
Sent: Thursday, August 07, 2008 9:25 AM
Subject: [MW:996] Equivalent Material

Dear Sir,

1) I want to conduct Welder qualification test on this pipe material API 5L X56, what is equivalent material in ASME? Due to non availability of Actual material

2) I want to conduct Welder qualification test on this plate material BS EN 10025 Part 3 S355 NL material, what is equivalent material in ASME? Due to non availability of Actual material

skumarswami@yahoo.co.in 
 
Regards,
S.Senthilkumar


Bring your gang together. Do your thing. Find your favourite Yahoo! Group.

Check out the all-new face of Yahoo! India. Click here. --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...