Friday, August 8, 2008

[MW:1010] Re: Material query for SS 304N

Banerjee

This might give some idea.

http://www.ssina.com/view_a_file/designguidelines.pdf.

Also you have high allowable stress in case of 304N incomparison with
304L or 304

There is a deiffernce in minimum requirement on yiled strength 35KSI
(304N) /25 KSI (304L), 304 (30KSi)

Hope this helps

On 8/8/08, Sudipto_Banerjee@fwuk.fwc.com <Sudipto_Banerjee@fwuk.fwc.com> wrote:
>
> Hi friends,
> Pls. let me know may be in what circumstances SS 304N is used in place of
> SS 304 or 304L.
>
>
> Best Regards,
> Sudipto Banerjee
> Equipment Engg. Department
> Office no. 0044- (0)118 913 2295
>
>
> =======================================================
> Confidentiality Notice
>
> This communication and the information it contains:-
> (a) Is intended for the person(s) or organisation(s) named above and for no other person(s) or organisation(s).
> (b) May be confidential, legally privileged and protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you have received this communication in error, please contact us immediately by email at Postmaster@fwuk.fwc.com.
> =======================================================
>
>
> >
>

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...