Wednesday, March 2, 2011

RE: [MW:10102] THROUGH THICKNESS DUCTILE TESTING

Short transverse tensile test or through thickness ductile testing is carried out to determine the Ductility of the plates in the Z direction. Due to presence of rolled oxide & Sulphide inclusions, the ductility in the Z direction will be vastly reduced which leads to Lamellar tearing and also HIC. To prevent this normally through thickness testing is recommended for high thickness plates.

 

J.Gerald

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of manoj john
Sent: Wednesday, March 02, 2011 1:46 PM
To: materials-welding@googlegroups.com
Subject: [MW:10088] THROUGH THICKNESS DUCTILE TESTING

 

Dear members,

 

One of my client technical specification calls for through thickness ductile testing for plate thickness above 40 mm.

 

Can you give information about through thickness ductile testing & why we need to carry out this testing?

 

With kind regards.

Manoj

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


Confidentiality Notice

This communication and the information it contains:-
(a) Is intended for the person(s) or organisation(s) named above and for no other person(s) or organisation(s).
(b) May be confidential, legally privileged and protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you have received this communication in error, please contact us immediately by email at Postmaster@fwuk.fwc.com.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...