WPS/PQR for Mechanical properties & Welding Performance Qualification for Welders is to verify his ability to make sound weld. Impact does not have any influences on welder performance.
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015, ISO 3834, EN 15085,
International Welding Engineer.
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Mon, Apr 7, 2025 at 1:32 PM Elavarasan Mech <elavarasan1861994@gmail.com> wrote:
Dear Expertwe have qualified WPS for 8 mm & 25 mm plate with impact (8-16 mm range & 16-50 mm ) as per ASME sec IXWhat about the welder qualifications we need to be consider impact requirement same as per WPS or impact requirements doesn't required for welder qualifications please guide meRegardsELAVARASAN--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4yma_rkksaAF0azyoL7jbiNNjZrp3taCiuHHWdumPT5mMg%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eP8rLHYtQfOLMAzE_4-Dk_AiYXyaPehiHZSYp3ukM%3DJJQ%40mail.gmail.com.
No comments:
Post a Comment