Dear
You can weld 8mm thickness plate by saw welding procedure but saw welding wire dia selection is more important, because of it is based on ampere and voltage. In 8mm thickness plate if you use 3.2m wire then it will be twisted/deform the plate. Welding material selection is based on base material and required parameters
With regards,
Bhaumik patel
On Sun, 30 Mar, 2025, 5:07 pm Elavarasan Mech, <elavarasan1861994@gmail.com> wrote:
Dear Expertwhat are the minimum thickness can qualify SAW welding .8mm thick plate possible to weld ( GTAW -4mm & SAW 4 mm )We choose F7A5-EM12k combination please guide meRegardsElavarasan--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4yn6F8A5ho_t8EUk8aiuenOV7NZwqufij95o6bF7Nnc2gg%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CA%2BrvNWPxsizuc5d608nGVR1aFCBNMERSB8pdPLNErs%3DUVWArCA%40mail.gmail.com.
No comments:
Post a Comment