Impact not a essential variable for welder, but welder must to follow WPS.
Welder will get 2xdeposit material thickness.
On Mon, 7 Apr 2025, 1:32 pm Elavarasan Mech, <elavarasan1861994@gmail.com> wrote:
Dear Expertwe have qualified WPS for 8 mm & 25 mm plate with impact (8-16 mm range & 16-50 mm ) as per ASME sec IXWhat about the welder qualifications we need to be consider impact requirement same as per WPS or impact requirements doesn't required for welder qualifications please guide meRegardsELAVARASAN--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4yma_rkksaAF0azyoL7jbiNNjZrp3taCiuHHWdumPT5mMg%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAEabyKn9UyzRM8C7ksu2hs5qHNM1Jn%3DijDUE21rOd74Zxmxmxg%40mail.gmail.com.
No comments:
Post a Comment