Re: [MW:35512] ASME SEC IX JOJNT DESIGN

Dear Mr. Elavarasan,

As per ASME Section IX, a Welding Procedure Specification (WPS) does not strictly require a joint design 

sketch, but it must address certain variables such as groove design and root spacing. These variables are 

considered non-essential for most welding processes, meaning changes in them do not require requalification 

of the procedure. However, they must be specified in the WPS to guide the welder.

1.Groove Design: While a change in groove design is a non-essential variable for most processes, the WPS should 

   specify the types of joints permitted in production. Stating "all groove designs" is not acceptable; instead, the WPS 

   should list specific types (e.g., V-groove, U-groove) or reference a drawing that illustrates the allowable joints.

2. Root Spacing: This is also a non-essential variable. The WPS should address root spacing but does not need to 

    include a sketch. However, if a sketch or drawing is used, it must be accessible to the welder and accurately depict 

    the joint details.

Client's Request:
Your client's request to add a sketch (like root gap, root face, included angle) to the WPS is reasonable for clarity and 

to ensure that the welder understands the joint requirements. While not mandatory, including such details can enhance 

the WPS's effectiveness in guiding the welder and ensuring consistency in production welds.

Best Practice:

• Include specific details about the joint design in the WPS.

• If a sketch is added, ensure it is clear and accessible to the welder.

• Alternatively, reference a manufacturing drawing that includes these .

Trust it is clear,

rgds,

C Sridhar.

On Sun, 6 Apr 2025 at 08:45, Elavarasan Mech <elavarasan1861994@gmail.com> wrote:

Dear expert 

As per ASME SEC IX in WPS  joints design sketch is required or not  .our client commented in our WPS need to add sketch (like root gap, root face ,included angel )please guide me 

Regards 

ELAVARASAN 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4y%3DSdC%2BViuR1doMm4xBi6t%2BKi-3agpW%2BHv-mAOHXB1fMfQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAHo%3DYijfWiYza2FnSciua3w_vdWvVL2hhEbP1yFnhPjrHnzH1Q%40mail.gmail.com.