Though joint details are non-essential variables as per ASME Sec.IX, those details need to be addressed in the WPS. If the GA drawings indicate clear sketch with these client required details, then only non-essential variables to be mentioned with ref to GA drawing else sketch need to be indicated in the WPS>
Thanks & Regards
J.Gerald Jayakumar
0091-8838619635
On Sunday 6 April, 2025 at 08:45:06 am IST, Elavarasan Mech <elavarasan1861994@gmail.com> wrote:
Dear expert
As per ASME SEC IX in WPS joints design sketch is required or not .our client commented in our WPS need to add sketch (like root gap, root face ,included angel )please guide me
Regards
ELAVARASAN
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4y%3DSdC%2BViuR1doMm4xBi6t%2BKi-3agpW%2BHv-mAOHXB1fMfQ%40mail.gmail.com.
Comments