[MW:25859] HOW TO REBUILD A WORN-OUT WIRE DRAWING DRUM BY WELDING

Hi Experts,

I need your suggestions on rebuilding of a wire drawing drum by welding. (Please find the attached photographs)

1. I need to know what could be the exact base material used for the normal wire drawing drum. (Please find the attached photographs)

2. What is the optimum hardness recommended to withstand high wear resistance of longer wire drawing.

3. Which alloy combination is recommended for the welding electrode that needs to be used.

4. Should i use any low heat input electrode, hardfacing electrode or conventional electrodes with high tensile properties(E12018 - G)...etc.

Regards

Adil. C

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d5163bf6-b6f9-4628-84de-5ec0cd682df2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.