Re: [MW:24067] Re: PQR position conflicts

unless there is impact requirement, position is non essential variable as per ASME sec 9

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

On Thu, Jan 7, 2016 at 10:03 PM, Vishwas Keskar Welding Manager Pune India <vvkeskar123@gmail.com> wrote:

YOU CAN USE THE SAID WPS. IT IS ACCEPTABLE

On Tuesday, December 8, 2015 at 8:58:42 AM UTC+5:30, Reddy wrote:

Dear experts

As per sec IX

I have an PQR which qualified on 3G(Plate) so

Q.1) Can i use that pqr for to weld 3Nps pipe 6g positions welding.

or is there any conflict between plate and pipe qualification.If there experts can explain why?

Bets regards

reddy.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/96e4b647-227e-4ed3-8a58-3385abee6f4c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNxpwn98grzqAmTHnUmGHzyso0ox0ab6%3DFY-iJhLstADw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.