ok sir,
Now we have fillet welding of 6mm dia rod with plate .
Do we need do qualification of Rod diameter as per EN 15614-1?
Thank you
Vijay Katkar
On Wed, Sep 16, 2015 at 3:18 PM, <george.dilintas@gr.bureauveritas.com> wrote:
--because of the diameter.
If your diameter would be larger than 500 mm or when the diameter is > 150 mm and the position are PA or PC position then you would not need a new qualification
best regards
Dr. Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS PIRAEUS - GREECE
Tel: +30 210 40 63 113 /4 /5
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/OF07724A1A.A5E9FE70-ONC2257EC2.0035546A-C2257EC2.0035E83A%40LocalDomain.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAP37wrJc-bhYB6FYoWnpXYBQzxHtztg5kC%2BAZHVT77bn7tH9aA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment