Is their any reference to code that says PWHT not required for non pressure parts. Or only pressure parts required PWHT.
Regards,
Prasad G.
On 31 Aug 2015 19:55, "S.Mohammed" <mohd52100@gmail.com> wrote:
-- vessel subject to pwht then weld prior n do pwht.
bcse any way skirt going to weld with pad which directly weld with vessels.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/38b09431-d6ff-43a2-ad04-3bbecd11b648%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEi5r3YGXuXBPzZ3RCS-F%3DPhgSq3GVKFxcww8MnVFN_9E1wCwg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment