Dear All,
-- Presently i dont have B31.3_2014 Edition, can some one please send the page which exempts P1 Materials of all thickness from PWHT.
Thanks,
Dinesh
On Tue, Sep 1, 2015 at 12:02 PM, Raghuram Bathula <raghurambathula@gmail.com> wrote:
PWHT is exempted for all thicknesses and weld types of P-No 1 base material, subjected to meeting the requirements of Notes in Table 331.1.3 (such as preheat and multiple layer welds...).--On 1 September 2015 at 12:24, S.Mohammed <mohd52100@gmail.com> wrote:Dear all,As old ASME B31.3-2012 we know it was above 19mm req pwht,now i read ASME B31.3-2014,little confused me with pwht exemption and pwht requirements and control thickenss 331.1.3?q1- what is thik req for pwht for P1 as per b31.3 2014 ?q2 : for P1,mentioned more than 25mm thk and 95C preheat exemption from pwht so less than 25mm not require pwht ?regards,mohd.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVubnk3xuYwy6MOyiH2wh%2BUp8uBAihqDxHjoWDfOFeeKhzmw%40mail.gmail.com.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB6xTc88aoAM_ozBp6yZpRkbYs%2BMKpzuDyOOfsKz4bYuC_G4CA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment