Hi experts,
I have two PQR'S
1) GTAW : PROVIDES BASE METAL RANGE 1.5 TO 5
2)SMAW : PROVIDES BASR METAL RANGE 5 TO 32
QUESTION : CAN I MAKE WPS QUALIFICATIONS RANGES FROM 1.5 TO 32
AS PER QW200.2(f): yes
As per QW 200.4(b): No
Also refer interpretation IX-10-34
I stuck between these two clauses and interpretation,
Can any one provide correct interpretation.
Thanks
Mahesh mirje
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/667d22f6-242a-4907-8949-453aac804d44%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment