there is not butt weld applicable on flush-type cleanout door
On Sat, Jun 7, 2014 at 10:21 AM, Ramin Kondori <raminkondori@gmail.com> wrote:
Dear Krishna Kamal:
It is full-RT and it should be so.
These openings are so critical that even in some cases, these openings shall be prefabricated separately and then PWHT shall be applied on them and that's when you can install them on the tank (i.e. at site). So do not be surprised by 100% RT requirement.
On Fri, Jun 6, 2014 at 11:09 PM, Jorge Mejía Lema <jmejialema@gmail.com> wrote:Ok!! BR, I have send a part of API560, 2013 year. You can read it and make clear the concept.Regards,jml
2014-06-05 10:04 GMT-05:00 krishna kamal nayan Pandey <kkmech1987@gmail.com>:Mr. JML,Thanks for your response.We do not have UT facility at the moment. Actually i ma talking about the welding of nozzle with the shell. for which API 650 says:-
8.2.2.d) The butt-weld around the periphery of an insert plate that extends less than the adjacent shell course height and
that contains shell openings (i.e. nozzle, manway, flush-type cleanout, flush type shell-connection) and their
reinforcing elements shall be completely radiographed.
The area where i am confused is 8.1 in API 650 says this criteria applies to vertical joints only.
Kindly confirm.
BR,
Krishna
--On Thu, Jun 5, 2014 at 3:40 PM, Jorge Mejía Lema <jmejialema@gmail.com> wrote:
Mr. BR Krisna: You can apply UT, Fhase Array test, in lieu RX.8.3.1 Ultrasonic Examination in Lieu of Radiography
When ultrasonic examination is applied in order to fulfill the requirement of 7.3.2.1, the provisions of Annex U shall
apply.
I remember you that this flush type Shell connection required weld heat treatement.RegardsjmlForm Colombia South America--2014-06-04 22:09 GMT-05:00 krishna kamal nayan Pandey <kkmech1987@gmail.com>:
--Dear Experts,Good Morning to all!!!I need your advice about RT requirement for Insert type nozzle and Flush Type clean out door as per API 650 Tanks.Awaiting your valuable response,BR,Krishna
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment