[MW:19986] Re: Side wall lack of fusion

Dear Friend

Measuring the LOF by DT can be done by Macro examination. But before going for macro, it will be better first identify the location of LOF by NDT method, UT is the best way to locate the exact location and size for LOF types defects.

You need to cut the cross section of the weld i.e. perpendicular to the welding axis direction. 

Regards

Sandeep Kumar

On Friday, January 10, 2014 12:20:28 AM UTC+5:30, sara vana wrote:

Dear experts,

How to measure side wall lack of fusion by destructive testing.
Component : butt welding of plates
Joint configuration : groove weld with included angle sixty degree

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.