Dear sutar,
CC: Sanjay Yadav - Pl read specification not specified minimum size..
Spin-holes not greater in diameter than 23⁄8 in. (60 mm) may be closed with a full-penetration weld using either a welded plug or weld metal. The weld and pug shall be no thinner than the head material adjacent to the spin-hole.
The finished weld shall be examined7 and shall meet the acceptance requirements of Appendix 6 or Appendix 8 of this Division. Radiographic examination, if required by UW-11(a), and additional inspections, if required by the material specification, shall be performed. This weld is a butt weld, but it is not categorized. It shall not be considered in establishing the joint efficiency of any part of the head or of the head-to-shell weld.
M Veera SAMY- Bureau Veritas. Coimbatore
Thank & Best Regards,
Date: Sun, 9 Sep 2012 22:20:11 +0530
Subject: Re: [MW:15254] maximum and minimum size of Dish end end SPIN hole plate.
From: ssy070707@gmail.com
To: materials-welding@googlegroups.com
dear sutar,
Dear Sir,
What is the minimum & Maximum size of spin hole plate as per code reference. Pls reply me.
HEMANT SUTHAR
QA/QC
CEPL-SILVASSA
9712973092
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment