API 1104, para 5.4.2.8
--Hello,
If WPS does not mention time elapsed between root and hot pass, it should never have been approved, as this is an essential variable as per API 1104 clause 5.3.2.10
Regards
Graham Adams
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of mohd.qce
Sent: 17 May 2012 11:58 AM
To: materials-welding@googlegroups.com
Cc: jesti fer
Subject: [MW:14291] Re: Time between root pass and hot pass
Dear all,
If welding code is API1104 then there should be lapse timing between root and hot and subsequent passes..
any way as per ur case there is no timing..then..even no need to perform NDE also..because ur following WPS for weld as per ur code..correct..
Just make necessary preheating prior starting hot pass.
regards,
mohd.
On Tuesday, May 15, 2012 4:25:43 PM UTC+3, jesti fer wrote:Dear all,
We are doing 20" pipe line project with API 5L Gr.B material as per B31.4, Welding process SMAW (E6010 for root and rest with E 7018, both are up-hill) our welder welded one joint root pass and he kept this joint for long time. But our Qc instructed to cut and re-weld the joint. But the time between root pass and hot pass not mentioned in approved WPS and client specification also.
It necessary to cut and re-weld?
It is mentioned any were in the code (ASME or API)?
Please help me,,
Best Regards
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment