Which ASME code – B31.1, B31.3, I ? In the codes I normally find the requirement for reinforcement.
jean
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of I.K.Inspection Services
Sent: Thursday, December 22, 2011 3:51 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:13255] Minimum acceptance criteria for weld reinforcement for pipe and plate
Dear all,
Reinforcement height or excess weld metal of cap is as per the design code. However, if the height is more then your weld is getting weak bear this in mind and many of us we do not give important on this.
regards
IK
On 30 November 2011 15:40, madhan chozhan <madhanchozhan@gmail.com> wrote:
jamil,
the weld reinforcement depends on the weld thickness and the same can be found in table 341.3.2 of B31.3.
On Wed, Nov 30, 2011 at 3:21 PM, md jamil ahmad <jamilmech2009@gmail.com> wrote:
Dear All,
Any body explain me,1) what is the minimum acceptance criteria for out side weld reinforcement for power piping or process piping
I think,in general 1.6 to 3mm,is it correct or not.
2) In inside welding of pipe what is the minimum and maximum reinforcement criteria,please tell me as per ASME Code.
REGARD
JAMIL AHMAD
KSA
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorized. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator.
No comments:
Post a Comment