Re: [MW:13133] Is it downcommers comes under saperate piping

dear exert,

I have one more doubt economiser header to pipe line at site in between spool header is there this is joined by bolting is it required separate MPDR or it can be inclooded in economiser MPDR.



Best regards,

K . Jagath

On Sat, Dec 3, 2011 at 7:55 AM, Karthik <karthik6684@yahoo.com> wrote:

Hi,

Yes.you can make MPDR for each  Equipment/Item before send to site. and after welding you can make one MDR for total boiler

 

Thanks & Regards,

(Karthik)

Karthikeyan.S

QA/QC Manager

Getabec Energy Co.,Ltd.

379,Moo6,Soi8,Nikhomphatana,

Rayong-21180,

Thailand.

Phone: 0066 38 897035-8 (Off)

Fax: 0066 38 897034

Hand Phone: 0066 892512282

---

From: jagath kavali <jagath.kavali@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>

Sent: Saturday, December 3, 2011 1:48 AM

Subject: [MW:13128] Is it downcommers comes under saperate piping

For code vessel boiler , stam drum, risers & downcommers are  sending
saperately to the site , at site these equipments are joined by
welding we are making equipment wise MPDR (manufacturers partial data
report) it is enough or for each equipment MDR (manufaxturers data
report ) required. Please reply me.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.