Re: [MW:12624] RT film overlap

minimum one inch on both the ends of the film.

On Tue, Oct 4, 2011 at 11:58 AM, mike ball <oiqsnig@yahoo.com> wrote:

look up formular for calculating diagnostic film lenght DFL or actual external circunfrence divided by no of exposures plus 100mm i.e 50mm on both ends.

---

From: Nandesh Kumar <nandeshkumar@rocketmail.com>
To: materials-welding@googlegroups.com
Sent: Tuesday, October 4, 2011 5:34 AM
Subject: Re: [MW:12620] RT film overlap

two inch on both the ends of the film.   Nandeesh --- On Mon, 3/10/11, KASHKOUSHA <kashkousha1@yahoo.com> wrote: From: KASHKOUSHA <kashkousha1@yahoo.com> Subject: [MW:12611] RT film overlap To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com> Date: Monday, 3 October, 2011, 12:29 PM Dear all Please could any one explain the length of film overlap for pipe acc.to ASME V Regrds     H.KASHKOUSHA -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Best Regards,
Anna.Murugesh.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.