Re: [MW:5664] Paint for Aluminum Heat Exchangers

Thanks AGUSTIN JIMENEZ

 

Could you please advice the solution of that because we are facing the bigest prob of our final finishing process of our product and customer demand more gaurentee of that side. There are techniques avilable in market, chromatizing, anodizing, epoxy coating, powder coating but out of all these which one will be economical for need.

 

 

Amit

 

On Sun, Jun 20, 2010 at 8:50 AM, AGUSTIN JIMENEZ <agumarca@yahoo.com> wrote:

Hi.

Is recommendable not paint, if you paint you will have problem with temperature interchange.

 

AGUSTIN JIMENEZ

---

De: "amitrunsworld@gmail.com" <amitrunsworld@gmail.com>
Para: Materials & Welding <materials-welding@googlegroups.com>
Enviado: vie, junio 18, 2010 1:09:21 PM
Asunto: [MW:5651] Paint for Aluminum Heat Exchangers

Dear Group Members,

Could you please guides which type of paint we can use for general
application for corrosion protection purpose for aluminum heat
exchanger used as an Engine Radiator, Transformer oil cooler, Oil
coolers for locomotives working temperature up to 150C.



Thank you
Amit

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.