thank you for reply.
your answer is coorrect. but in refered paragraph ,AWS says the weld
shall be flush with face of base metal.
regards
On Mar 9, 2:18 pm, Chaitanya Purohit <chaitanya_puro...@yahoo.co.in>
wrote:
> Dear Asghari
>
> Obviously its including reinforcement.
>
> Just draw the sketch and remove the reinforcement. Then draw the
> concavity......
>
> From the sketch you will come to know that there is no possibility to get
> the thickness equal to basemetal if you remove the reinforcement.....
>
> Regards.
> CK
>
> On 9 March 2010 11:06, Ali Asghari <asghari...@rocketmail.com> wrote:
>
>
>
> > Dear All
> > according AWS D1.1(4.8.1.4),the max depth of root concavity in PQR test
> > piece, is 2mm provided the total thickness of weld is equal or greater than
> > base metal.
> > now the total thickness of weld included reinforcment in face or not?
> > regards- Hide quoted text -
>
> - Show quoted text -
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment