Monday, March 28, 2011

RE: [MW:10513] ISO lead auditor course

Good Afternoon

 

The company that I have used for all ISO courses /Information is Lloyds Register Quality Assurance

 

For all training contact   lrqatraining@lrqa.com  

 

For all enquiries contact enquiries@lrqa.co.uk they will answer all questions and give sound advice and guidance,

 

Regards 

 

David

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of manpreet
Sent: 28 March 2011 11:46
To: materials-welding
Subject: [MW:10511] ISO lead auditor course

 

Dear All,

I have been asked by mu company to obtain a ISO lead auditor certificate for forging, casting and metal fabrication, really have no idea about it, can somebody provide me info regarding above and name of the institute?

Regards
Manpreet Singh  

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



__CONFIDENTIAL:

Clyde Union DB Limited
Incorporated in England & Wales – Number 331925
Registered Office – Green Road, Penistone, Sheffield S36 6BJ, England

The information contained in this email (including any attachments) is confidential, subject to copyright and for the use of the intended recipient only. If you are not the intended recipient please delete this message after notifying the sender. Unauthorised retention, alteration or distribution of this email is forbidden and may be actionable.

Attachments are opened at your own risk and you are advised to scan incoming email for viruses before opening any attached files. We give no guarantee that any communication is virus-free and accept no responsibility for virus contamination or other system loss or damage of any kind.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...