Hi,
I think that as per SA 105 UT is not required until the contract requirement calls for , as far as SA 388 is considered, please refer clause no 1.2 of SA 388 which clearly specifies the scope for conducting the UT. SA 388 defines the guide line for conducting the UT on the heavy forgings.
Regards
Hasan
On Thu, Mar 10, 2011 at 4:02 PM, Ramprasad Chari <ramprasad.chari@gmail.com> wrote:
Tf is to be considered for UTRegardsAarpeeOn Thu, Mar 10, 2011 at 1:36 PM, pankaj kolhe <pankaj.kolhe15@gmail.com> wrote:
Sir,
We procure some SA 105 forging flanges in which UT has been carried out for 20" ASA 150# flange SORFas per SA 388
But for 4" 600# WNRF UT is not carried out why is it so?
in SA 105 nothing is mentioned
also extra requirement is also not given by design
is UT is mandatory for all forgings?
As per SA 388 UT shall be done above 50 mm thk
but which thk is to be considered tf or y in case of WNRF
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment