Re: [MW:35569] DISTORSION

It is closed square box 

Sent from my iPhone

On 25 Apr 2025, at 9:41 AM, Nambirajan Avudaiappan <nambirajanavudaiappan@gmail.com> wrote:



Dear vishwas sir, 

Why we can try spider to avoid the distortion correct me if I am wrong. 

On Fri, 25 Apr, 2025, 5:24 am Vishwas Keskar, <vvkeskar123@gmail.com> wrote:

Dear Experts
Pl share AIR FIN FAN cooler SS316 MOC  fabrication sequence to avoid partition plate distortion
Thr partition plate is distorting in its full length after full welding the corner 4nos (32 mm groove )of Square Box Header welds
GTAW + SAW is used

Pl guide

Sent from my iPhone

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/2E591BA9-F1C2-4331-8B27-A395AF0477D8%40gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJuyB2U9%3Dy1s1SANvYW8ZLsJxV_PBFY1A-Pv_NU9o0-vDfWmFw%40mail.gmail.com.