Friday, May 2, 2025

Re: [MW:35546] WELDING OF SS 310 MATERIAL CRACK ISUUE..

Thickness is 22 mm for Pipe rolled fom plate and welding... 



Warm Regards,
Pravin Mali
REPUTE STEEL & ENGINEERING CO.
global.repute@gmail.com; reputesteel@gmail.com
+91 9819742205  |   +91 8850830307  |   02266595628 
MUMBAI | INDIA

On Fri, 18 Apr 2025, 4:50 pm patni engineers, <patniengineers@gmail.com> wrote:
Welding of SS310  is critical . You need to control Many Parameters.
What is Job thickness and  type of Joints.
Chandrakant
+91 9967323210

On Fri, Apr 18, 2025 at 4:34 PM Repute Steel & Engineering Co. <reputesteel@gmail.com> wrote:
We are doing a welding of SS 310 Material Plate with ER310 Grade welding electrode... But its contineous cracking.... at welding line,,,,...? Kindly Guide if any one..

IS ANY ALTERNATE WELDING MATERIAL CAN BE USED...?
IS ANY SPECIAL PROCEDURE TO WELD THIS MATERIAL...?

PRAVIN
REPUTE STEEL & ENGG CO

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1c268d9c-0c7c-4712-843a-fcd426db2ca4n%40googlegroups.com.


--
Regards,

Chandrakant
B.E Mech.
ASNT Level II RT/UT/PT/MPT/CSWIP

GST -27AMOPP5962A1ZS
Patni Engineers. Mumbai. India
PED/2014/68/EU
welding shop AD2000/DIN EN ISO 3834
IBR Approved 

Factory Addreess- Pl Call 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAKLNAG5s7n_4iK1HUpvUF9KL%3DLE43YGsc0956tT6dgM8Mi9Xaw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CABirW4KjSau%2Bh2onzd9ima7TzbAEBK%2Bf%2BKhO_GJsosvrdKHU3Q%40mail.gmail.com.

No comments:

[MW:35668] Selection of Filler/Electrode.

Dear Gentlemen, Kindly advise me as we have tube to tubesheet joint. Tube moc is incoloy 800 And tubesheet moc is F53 SDSS (Super duplex sta...