Re: [MW:35562] Can I write single WPS with two PQR . as per ASME sec IX

Sir,

Yes, you can write a single WPS supported by two different PQRs with different welding processes, provided the following conditions are met as per ASME Section IX:

Code Reference:

ASME Section IX, QW-200.4(b): Attached for your

reference 

BR, 

Deerendra 

On Thu, 24 Apr, 2025, 18:03 venkateswara reddy Desireddy, <dvreddy82@gmail.com> wrote:

Dear experts ,

Can I write single WPS with two PQR .PQR are different process. onePQR SMAW & one PQR SAW

Regards 

D.V.Reddy

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAEabyKmVceU4rJSYo5xdwsb_EO_eUJ3Jk3k9OU9RkoKGiACnPQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAG0nF9F5dFEPq2OExTnxObE1nqtgsSk%3DjJ5%2B14XScHBeDXX4bw%40mail.gmail.com.