Re: [MW:29963] Heat treatment of WPS

Dear sir,

please provide the code reference....

thanks & regards,

Brijesh maurya

On Mon, Aug 12, 2019 at 5:40 PM 'Prakash Hegde' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Hi!

Pl clarify

1)a)Does Dishend.have weld seam which ll undergo normalsing? After forming

If yes you wiil req qualified.WPS/pqr of normalise +pwht below Ac1 as per code for P1

b)If no then you need not.have pqr of Normalising but only Pwht below Ac1 as per code for P1

2) in case of condition (a) you should have 2Pqr one with NR+pwht  and second with pwht below Ac1

In case of condition (b) only.one Pqr of pwht below Ac1 temp as per P1 matl

Regards

Hegde

Sent from Yahoo Mail on Android

On Mon, 12 Aug 2019 at 15:44, chiluka venkatramulu

<ramuluchiluka@gmail.com> wrote:

Dear All,

Pl clarify the below.

One of vessel under fabrication will under go the fallowing heat treatments. (Material-516 G 70, shell-63 mm, dish end -75mm, dish end in one piece only)

• Dishends Normalising-2 cycle.
• PWHT for whole vessel.

Now shall I need to do all three heat treatment cycles to qualify WPS?

OR

Only two normalising cycles are enough?

Regards,

Venkatramulu

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF98%2BdGvDLB4C3Y24JY-HL4JW2%3DC%2BUuXnw8sFhsPDo6-i0sKSg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1487532532.3710168.1565605847733%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOBi_eMa8Tz3zgqkDt9Ot_NfT2anNThP1x6ZhLiwo84dm_-tDg%40mail.gmail.com.