Re: [MW:24009] Welder Qualification as per ASME SEC IX

Dear you can check his continue progress record of earlier based on that will able to test with RT or bend test.

On Dec 27, 2015 8:01 PM, "Mohd Azam" <azam1976@gmail.com> wrote:

Dear Expert,

"X" welder working with company and left the organization. Again after Two or three year he is joining back same company. All earlier certificate is available with company with proper documentation.

 

Is it possible to renew his earlier certificate with one sample based on RT or visual inspection OR All new qualification is to be done New. Qualification code is ASME SEC IX.

 

Pls provide your valuable input with standard reference.

 

Thanks & Regards,

Mohd. Azam

Doha-Qatar

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABD%2BRXSMVhvN0Fje56BbuQb6V3KSYO%3Dz17%2BLtshZO1u3Vt%2Bkhg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAELgRrUiS%2BLJEYHYoZEprFufNpf2UdmmiBR-U7WLGLMweMjQHA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.