Your concern on reliability and sensitivity of results is very important. What is the minimum thickness/diameter for which permanent magnet can provide reliable with reasonable sensitivity results?
On Saturday, December 5, 2015 at 1:04:46 PM UTC+4, micky wrote:
-- On Saturday, December 5, 2015 at 1:04:46 PM UTC+4, micky wrote:
NO...due to XX thick material will absorb limited flux density of magnetic and create poor sensitivity. Use AC/DC stilt magnet at 75mm max distance between poles, wet method oil based medium continuous technique
See ASTM listing for ref.standard.Mike henthorn
Sent from Yahoo Mail on Android
From: 'Kareem Sheikh' via Materials & Welding <material...@googlegroups.com >;
To: Materials & Welding <material...@googlegroups.com >;
Subject: [MW:23943] MPI with Permanent Magnets
Sent: Thu, Dec 3, 2015 2:33:13 PM
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/91bbece3-5795-4fa9-9d83-e2d44cf0153d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment