Re: [MW:24002] Iron Dilution in 70-30 Cu-Ni W.D. on P-No. 1 Base Metal.

Hi!

It is very difficult to achieve at 1mm from fusion line the undiluted chemistry unless you go on grinding of layers at least twice which is not a good proposal in such case you qualify the PQR with utmost precaution of overlap and heat input and  get the approval from client .

Regards

Hegde

On Wednesday, 23 December 2015 4:14 PM, Vanchinath S.A. <vanchinaths@gmail.com> wrote:

If you are analysing by spectro it should meet at 1mm. Otherwise you take chips from 1mm to 3mm and analyse the chemistry and prove it meets the requirement. In my opinion 5mm WD is required to meet 2mm undiluted weld.  Vanchinath

On 23 Dec 2015 15:52, "'CHINTUKUMAR GANDHI' via Materials & Welding" <materials-welding@googlegroups.com> wrote:

Dear Experts, 

Greetings of the day. 

 I need your expert advise on an issue. In one of our project, 70-30 Cu-Ni W.D. to be done on P-No. 1 base metal. As per client's Data sheet, 3.0 mm. W.D. is specified. Accordingly we have qualified WPS to get the undiluted chemistry on 3 mm. W.D. from interface as per ASME Sec. IX. But in client's project spec. it is specified- "in case a higher deposition thickness and multiple weld layers are required to achieve the minimum specified undiluted deposit metal, the same shall be done only after taking prior approval of client. Minimum thickness of undiluted finished weld overlay from top shall be 2 mm. or as specified in the drawing. Now, my concern is shall we have to certify undiluted chemistry at 1 mm. from fusion surface considering (3 mm. required W.D. as per Data sheet - 2 mm.) or at 3 mm. viz. top surface. 

Please revert at the earliest. 

 Thanks & regards, 

 C. R. GANDHI

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1264702308.2732768.1450865939902.JavaMail.yahoo%40mail.yahoo.com?utm_medium=email&utm_source=footer.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2B6Tn1%2BnY-QFMfxo7mMUBk0XFRATuz-LHFfff9o56Rvw%2BM9LRA%40mail.gmail.com?utm_medium=email&utm_source=footer.
For more options, visit https://groups.google.com/d/optout.