Thursday, December 3, 2015

[MW:23942] Re: Jacket piping

Any specified standards or is there any where mention that normal weld neck flange cannot be used in jacket piping

On Wednesday 25 November 2015, PRASANTH RAJAN <prasanthgalfar@gmail.com> wrote:
Dear experts    
  Is it possible for welding of jacket outer pipe on the  the inner pipe flange , its there any standard that allow the welding of pipe in forged material


--
WITH REGARDS
 
*PRASANTH RAJAN*
*MECHANICAL SUPERVISOR*
*GALFAR ENGINEERING EMIRATES*
*prasanthgalfar@gmail.com* <prasanthgalfar@gmail.com>
 




--
WITH REGARDS
 
*PRASANTH RAJAN*
*MECHANICAL SUPERVISOR*
*GALFAR ENGINEERING EMIRATES*
*prasanthgalfar@gmail.com* <prasanthgalfar@gmail.com>
 


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKCULh56XArsCojw_C4Q9KqRgftKbhETzWthAZX7Mwvi4DEkDQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...