Sunday, September 27, 2015

[MW:23564] Query regarding Table A-2 of ANSI/NACE MR0175/ISO 15156-3:2009

Hi, everybody

I have question regarding application of annex A of NACE MR0175/ISO 15156-3; in my project there is no chloride in process streams, however due to partial pressure value of H2S NACE requirements are applicable, in the mean time because  of corrosion rate (calculated) carbon steel is use less, my question is based on below table of NACE MR0175/ISO15156-3 (specified in red box), can I select SS316L?
 
 

Regards,
H.Nikdin
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...