Wednesday, July 2, 2014

Fw: [MW:21308] Use of Filler Wire E71T-1C for vessel with MDMT -29°C

E71T-5C is basic type flux cored wire and provides an impact requirement of 27 J at -30 deg. C.

and suits well for SA 516 Gr. 70 base.

It also gives 100% x-ray quality welds and better than E71T-1C  (rutile) for all thicknesses. 

The rutile version is good up to 20 thick only.
 
Regards,
C Sridhar.
Technical Adviser - Welding,
for Alsta Pristine Engineering Private Limited,. (SS Fabs) Bangalore

(A venture of Advance Engineering Training & Inspection Services). Chennai,

Mobile nos: 0 94449 71097, 0 7406 326326, 0 94445 21267.

 




On Tue, Jul 1, 2014 at 7:00 AM, Mhaskar Aly <mhaskar.aly@gmail.com> wrote:
Dear Friends,
 
We have
·         FCAW filler wire E71T-1C (Impact tested @ -20°C as per MTC)
·         Vessel (SA516 Gr 70; MDMT -29°C; Impact test exempted)
 
Can we use this filler wire for welding on above vessel for:
1.       Nozzle to Shell weld
2.       RF Pad to Shell weld
3.       Vessel external Attachments with pad.\
4.       Saddle Pad to Shell weld
 
Kindly provide Code Reference
 
Thanks & regards
 
Ali Mhaskar,
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


No comments:

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...