The whole exercise of cutting open a weld to see LoF is meaningless. Even if you find it by one method or the other what you are left with at the end is scrap. Unless it is a lab experiment.
With Best Regards,
Shashank C Vagal (Quality Adviser)
Neo Metal-Analyst & NDT Services (Approved by IBR, Thermax, etc)
Regd Office: 301, PRATHAMESH, M G Rd – Mahant Rd, Vile Parle East, Mumbai 400 057 INDIA
Tel : +91 22 2611 6640 / +91 9821386292 / 8082395502 / 9819191861
Works Office: B2, Matere House, Sector No. 14, Pradhikaran, Gat No. 62, Boradewasti, Moshi, Dist: Haveli, PCMC, Pune – 412105, Maharashtra, Indiawww.neometalanalystndt.com / enquiry@neometalanalystndt.com / nach_sam@yahoo.com
On Wednesday, 5 February 2014 3:32 PM, Bhagwat Ambule <bhagwat1977@yahoo.in> wrote:
Dear,
Lack of fusion with side wall in butt joint you can go through by following methods...
Method-1- Take section form test piece, grind smooth finish and perform Macro-eatch test.
Method -2- Take section form test piece, take test for 90 deg bending test at each side wall.
Thanks and regards,
Bhagwat Ambule.
On Friday, 10 January 2014 8:32 AM, Sara Vana <krmech2000@gmail.com> wrote:
Dear experts,
How to measure side wall lack of fusion by destructive testing.
Component : butt welding of plates
Joint configuration : groove weld with included angle sixty degree
-- Component : butt welding of plates
Joint configuration : groove weld with included angle sixty degree
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment