Dear Ratheesh,
Basically NACE MR 0175 requies the following:
1) Manufacturing Process (if your pipe is of a reputable manufacturer,
it is most probably OK)
2) Chemical Analysis (Carbon and some alloying elements has a maximum
limit. Check the Standard yourself)
3) Hardness (Maximum of HRC 22 or equivqlent. Again check it yourself)
These can be easily verified by field tests (portable hardness tester
and PMI equipment). The rest is a matter of negotiation with your
client and getting his approval...!!!
Best Regards,
Ramin Kondori
On 2/5/13, Rajagopal Kannan <rajagopal.kannan@gmail.com> wrote:
> Dear Ratheesh,
> Please talk to client whether they can accept based on Hardness test and
> material identification by optical emission.
> You can substantiate these two major requirements of NACE based on test
> results.
> Thanks and Best Regards,
> K.Rajagopal
>
>
>
> On Mon, Feb 4, 2013 at 11:20 AM, ratheesh ramachandran <
> pkrratheesh@gmail.com> wrote:
>
>> Dear Experts,
>>
>>
>> I have encountered some problem in my project site.Some
>> NACE material,pipe spools arrived in the site without proper pipe spool
>> identification.Now client is asking to prove that the material is NACE
>> .Some people suggested to cut sample coupon from these pipe spools and
>> sen
>> to laboratory for mechanical tests and whatever tests which are required
>> to
>> prove the NACE conformance.But because of the remote location of the
>> project site,it will be difficult for us to do that within a time
>> limit.So
>> can anyone suggest some method to identify the NACE material,any test
>> which
>> can be carried out in the site itself.
>>
>> regards
>> ratheesh.r
>> ksa
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Materials & Welding" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to materials-welding+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>>
>>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>
--
Ramin Kondori
* QC/Welding Engineer *
* IWE AT 0070*
*با تشكر*
* *
*رامين كندري*
واحد كنترل و تضمين كيفيت كارگاه ال ان جي كنگان
شركت نارديس انرژي
تلفن: 07727462189 داخلي 172 و171
فكس: 07727462179
همراه: 09132150320
آدرس: كنگان - سايت LNG - دفتر شركت نارديس
صندوق پستي 375 (اداره پست شهرستان كنگان)
*Regards*
*Ramin Kondori*
QA/QC Manager
IRAN-LNG Preoject
NARDIS ENERGY CO.
* *
*Tel.: +98-772-7462189 (Int.171, 172)*
*Fax: +98-772-7462179*
*Cell: +98-913-215-0320*
* Add.(Head office): No.27, 6th St., Seyed Jamalledin-e-Asad Abadi Ave.,
Tehran, Iran, 1431784891*
*Add.(Site): NARDIS Office, IRAN-LNG Plant, Kangan-Iran P.O.Box 375(Kangan
Post Office) *
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Subscribe to:
Post Comments (Atom)
[MW:34920] Tubesheet Hole step
Hello Team, I have one question any tolerance given for tubesheet Hole step. Please do needful. Regards, AP -- https://materials-...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment