thanks for your warm and encouraging reply.
the requirements are as below
1. ASME Section VIII Div 1
2.No Impact Test Required as per UG-84
3. No hardness Requirement ( but as a good engineering practice and to reduce the risk of cracking we can assume to limit the hardness to 200 BHN )
also please explain the selection process of Filler material to meet the requirements of code.
waiting for your warm reply.
thanks
regards
Ansari
--
Regards
Ansari Intekhab Alam
-- On Wed, May 9, 2012 at 8:27 AM, pgoswami <pgoswami@quickclic.net> wrote:
--Mr. Ansari,
What's the design code? any impact test requirements any hardness requirements?Appreciate your response.Thanks.Pradip Goswami,P.Eng.IWE
Welding & Metallurgical Specialist
Ontario, Canada.
Dear Experts
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of ansari intekhab alam
Sent: Tuesday, May 08, 2012 6:25 AM
To: materials-welding@googlegroups.com
Subject: [MW:14217] Flux-Electrode Combination required.Hi ,further can anyone suggest me that the electrode for SMAW and Electrode and flux wire combination for SAW Process.Details as are1. Material - SA 516-702.Thickness-70 mm3.Normalizing- ( 920 Deg - 150 min ) + Dress relieving ( 620 Deg - 350 Minutes ).also please suggest that how we can choose the electrodes and fluxes for a particular weld by using ASME Section 2 Part C.--
-
Regards
Ansari Intekhab Alam
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Regards
Ansari Intekhab Alam
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment