[MW:14218] RE: 14217] Flux-Electrode Combination required.

Mr. Ansari,

• What's the design code?
• any impact test requirements
• any hardness requirements?

 

Appreciate your response.

 

Thanks.

 

Pradip Goswami,P.Eng.IWE

Welding & Metallurgical Specialist

Ontario, Canada.

Email-pgoswami@sympatico.ca,

pgoswami@quickclic.net

 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of ansari intekhab alam
Sent: Tuesday, May 08, 2012 6:25 AM
To: materials-welding@googlegroups.com
Subject: [MW:14217] Flux-Electrode Combination required.

Dear Experts 

Hi ,

further can anyone suggest me that the electrode for SMAW  and Electrode and flux wire combination for SAW Process.

Details as are

1. Material - SA 516-70

2.Thickness-70 mm

3.Normalizing-  ( 920 Deg - 150 min )  +  Dress relieving ( 620 Deg - 350 Minutes ).

also please suggest that how we can choose the electrodes and fluxes for a particular weld by using ASME Section 2 Part C.

-
Regards
Ansari Intekhab Alam

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.