It is good that there is a discussion going on ORBITAL welding. I have one problem...
I have two pipes to weld but there is only a gap of 40mm on both the side of pipes. Can any one please send me the specification of ORBITAL welding tool regarding my requirement.
Thank you
On Mon, Oct 10, 2011 at 6:23 PM, AMIT PAHUJA <amitpahuja2@gmail.com> wrote:
Dear Mr. Jigneshyes ,this is required to make 'J' 'U' groove (with No Root gap) preparation for welding of Piping joints by ORBITAL Welding. because the lip or land thickness(1 to 2mm) of 'J' 'U' groove (with No Root gap) preparation will produce the consistant penetration of weld. and the Orbital Welding M/C head will control the Amps, Volts, Speed, with respect to the position of weld.Thanks & RegardsAmit PahujaSr. Welding Engineer
On Mon, Oct 10, 2011 at 12:06 PM, Desai Jignesh (Mumbai - Piping) <J.J.Desai@ticb.com> wrote:
Is it mandatory to make 'J' groove preparation for welding of Piping joints by ORBITAL Welding?
Regds/Jignesh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Regards
Ashish Yadav
institute For Plasma Research
Gandhinagar, Gujarat
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment