Re: [MW:5591] NONESSENTIAL OR SUPPLEMETARY

Dear Bathula
i think ,these parameters may affect on total weld volume& total heat
input.therefore affect on impact property.
i read in a book published by HARTFORD, that says heat input can be
calculated based on weld volume( that's reasonable) other than formule
in QW409.1.
DO YOU HAVE FORMULE FOR CALCULATING OF H.I BASED ON WELD VOLUME?
regards

On 6/14/10, ali asghari <asgharialigl@gmail.com> wrote:
> yes , it is true.
> but my intention is QW409.4 OR QW410.9 OR QW 410.10 are supplementary&
> non essential in same time.if the impact test isn't required, the
> supplementary are non essential.why botn of them are marked for the
> above variables?
> how them used?
> regard
>
>
> On 6/14/10, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote:
>> Supplementary essential variables shall become mandatory when impact
>> testing
>> is required by design. and when there is a change requalification is
>> required.
>>
>> Non Essential variables may be revised on WPS, but requalification is not
>> necessary.
>>
>> ________________________________
>> From: materials-welding@googlegroups.com
>> [mailto:materials-welding@googlegroups.com] On Behalf Of Ali Asghari
>> Sent: Sunday, June 13, 2010 10:46 PM
>> To: materials-welding@googlegroups.com
>> Subject: [MW:5580] NONESSENTIAL OR SUPPLEMETARY
>>
>> Dear All
>> in QW 250-QW280 in ASME sec IX,SOME VARIABLES ARE NON ESSENTIAL &
>> SUPPLEMENTARY IN SAME TIME.e.g in current
>> WHICH ONE SHALL BE CONSIDERED?HOW INTERPRETED?
>> REGARD ADVANCES
>>
>>
>>
>> Filtered by Hosted Filtering
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding-unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.