Re: [MW:5339] Presure Gauge Limits

Some company specs call for the test pressure to be between 1/3 to 2/3 of the gauge pressure.
Rakesh pandey
Empower your Business with BlackBerry® and Mobile Solutions from Etisalat

-----Original Message-----
From: "raghurambathula@gmail.com" <raghurambathula@gmail.com>
Date: Tue, 01 Jun 2010 14:51:36
To: materials-welding@googlegroups.com<materials-welding@googlegroups.com>
Subject: RE: [MW:5335] Presure Gauge Limits

Sorry for my last mail, inadvarently sent without text.
It depends on your construction code, if i am not wrong acc to B31.3, the range is 1.5 to 4 times the test pressure.
Sent from my Nokia phone
-----Original Message-----
From: SENTHILKUMAR SWAMINATHAN
Sent: 01/06/2010 2:52:07 pm
Subject: [MW:5332] Presure Gauge Limits

Dear All,
 
One of the fire water line to be hydrotest in 3000 ksi, with me available gauge is 4000ksi.
 
Is there any documents says we can use this limit gauge for testing or shall be tested only with min 6000ksi gauge only?
 
Regards,
S.Senthilkumar
Angola

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.