Re: [MW:5337] Presure Gauge Limits

Dear Senthil,

 

As per Code or project general specification ,pressure gauge limit always should be between 30 % to 80 % of test pressure.

 

Regards

 

 

Suresh

 

On 6/1/10, SENTHILKUMAR SWAMINATHAN <skumarswami@yahoo.co.in> wrote:

Dear All,   One of the fire water line to be hydrotest in 3000 ksi, with me available gauge is 4000ksi.   Is there any documents says we can use this limit gauge for testing or shall be tested only with min 6000ksi gauge only?   Regards, S.Senthilkumar Angola

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Thanks  & Best Regards,

Suresh

Mobile No: 91-92 92 905 905

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.