-----Original Message-----
From: SENTHILKUMAR SWAMINATHAN
Sent: 01/06/2010 2:52:07 pm
Subject: [MW:5332] Presure Gauge Limits
Dear All,
One of the fire water line to be hydrotest in 3000 ksi, with me available gauge is 4000ksi.
Is there any documents says we can use this limit gauge for testing or shall be tested only with min 6000ksi gauge only?
Regards,
S.Senthilkumar
Angola
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment