Hi, see this file..might be useful to you. Regards,
Karthikeyan.S Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Mon, 3/1/10, Gurcharan Singh <binz3@rediffmail.com> wrote:
From: Gurcharan Singh <binz3@rediffmail.com>
Subject: [MW:4398] Additive of Al
To: materials-welding@googlegroups.com
Date: Monday, March 1, 2010, 1:30 AM
Hi everybody I have to make a cylinder of thickness 6mm and OD 500 mm using additive manufacturing technology by using MIG welding with ER 4043 wire on 6000 series base material. Can anybody guide me on this. What dilution is required to use ER4043 with 6000 material to avoid cracking and how to get this . Thanks Gurcharan -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment