[MW:3601] Re: material selection

Dear Kannan,
                  Better to go for CS pipes with Rubber coating . We are master for such jobs .
Regards
Anant
Ocean Rubber Factory Shj. UAE
 
> Date: Thu, 5 Nov 2009 05:52:29 -0800
> Subject: [MW:3597] Re: material selection
> From: kannan_cit@yahoo.com
> To: materials-welding@googlegroups.com
>
>
> For water service there is a good reference of collection of papers,
> from NACE titled Guide to the use materials in waters by Michael
> Davies and PJB Scott.
>
> Personally, from a material engineer perspective, I would advice a Cu-
> Ni alloy (C70600) which is widely used, if the size is smaller. If
> sizes are larger RTPR with preferable Polyester resin, if not with
> Epoxy would be cost effective and suit the need.
>
> Regards,
> Kannan
>
> On Oct 7, 12:06 pm, Ali Asghari <asghari...@rocketmail.com> wrote:
> > dear all
> > what is the best material can be replaced with duplex(1.4462) that have a good properties in sea water & good resistances to pitting & S.C.C?
> > does anybody know or have informations or books for material selection?
> > regards
> --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---