Undercuts shall not exceed 1/32 in. or 12½ % of the wall thickness
whichever is less.
regards
Sandeep Kumar
On Oct 28, 9:59 am, "Samimi Mottagi, Alireza"
<Sam...@mapnagenerator.com> wrote:
> Hi dear
>
> Please let me know that according to iso 5817 rev: 2005 class C the
> undercut with 0.2mm depth and 24 mm length in Butt Weld and 100 mm
> length of our product is acceptable or not.if yes or no please explain
> exactly with detail.
>
> Best regards
>
> Alireza Samimi
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment