[MW:613] RE: 608] Stress Reliving

As per general requirement for PWHT is the Wall thk of Pipe i.e. for CS it should be >= 19 MM, But for your case it looks like Sour Service,

In which one need to look at the Operating Pressure and Temp for the line.

Please elaborate these conditions, as the Material is Normal Carbon Steel grade B and the thickness is also S-XS i.e. 10.97 MM so it may not require the PWHT.

 

KUMAR BAGESH,

 

 

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Zameer Mohammed
Sent: Tuesday, February 26, 2008 12:10 PM
To: materials-welding@googlegroups.com
Subject: [MW:608] Stress Reliving

 

Gents

 

How to find out whether PWHT and stress reliving is required for a line.

 

The Pipe spec is

            6'', BE, SCH XS, SMLS, A106 GR. B SOUR SERVICE

 

Thank you,

 

Regards,

 

Sabir

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
-~----------~----~----~----~------~----~------~--~---