[MW:601] Re: ELEMENT WHICH GIVE LOW TEMP TOUGHNESS TO SA333 Gr.6

There's an interesting discussion of this topic here: http://www.hghouston.com/dcforum/DCForumID1/251.html . I think it is taking far too simple a view to assume that one element controls impact toughness, which primarily depends on microstructure. Thus heat treatment, mechanical forming and all forms of hot and cold working are also very important.

 

Regards,

Owen Jenkins.

----- Original Message -----

From: shailesh dave

To: materials-welding@googlegroups.com

Sent: Sunday, February 24, 2008 4:35 PM

Subject: [MW:599] ELEMENT WHICH GIVE LOW TEMP TOUGHNESS TO SA333 Gr.6

DEAR MEMBERS,

 

CAN U PL. TELL ME WHICH ELEMENT IN SA333Gr.6 IS IMPARTING THE MATERIAL TO WITHSTAND IMPACT TOUGHNESS AT SUB ZERO TEMPERATURE.

 

REGARDS,

 

S.N.DAVE

 

QA/QC MANAGER

 

TATA PROJECTS, SHUIABAH, IWPP-III,SIEMENS AG POWER PROJECTS

 

SAUDI ARABIA

---

Never miss a thing. Make Yahoo your homepage. --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
-~----------~----~----~----~------~----~------~--~---