[MW:604] Re: 13% Cr steel valve trims

Dear Ravi,

 

If a steel contains 13% Cr. it means it is stainless Steel.

The material specifications provided by your vendor are adequate. You may even use SS304 grade.

 

Regards,  

ravi kiran yeleswarapu <kiranry@rediffmail.com> wrote:

Gents,

Please share your views on following:

"As per specs valve trims are required to be of 13% Cr steel" no further details given w.r.t. material specs nor clarified with client then.
However vendor has supplied A276-316 for stem and A351 CF8M for disc.

Are above acceptable as per spec of 13% cr steel.

As per client's interpretation of 13% Cr steel means AISI 410 or equivalent but not 316.
 

Best regards,

Ravikiran

---

Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
-~----------~----~----~----~------~----~------~--~---

Subscribe to: Post Comments (Atom)

[MW:34919] Welder qualification certificate

Dear All     anyone can share a format for welder certificate and card format        Thanks & Best Regards Saleem manhappulath Mob:+9665...

• Materails FAQs

  Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
• RE: [MW:5585] Buttering of weld joints

  Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
• 

  WELD AND WELDING SYMBOLS

  Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...

Search This Blog